DVB-S2/T2/C měřící přístroj Rover TAB5 ULTRA s H.265 HEVC

SPECIAL FUNCTIONS

   Exclusive patented ROVER AUTODISCOVERY system: auto-matically detects and selects analog and digital COFDM/QAM TV signals in both measurement and spectrum mode.
   Automatically identifies all the signals with digital modulation SAT, TV and CATV.
   Automatic Assistant: Signal Quality analysis, Channel Scan memorization.
   Barscan TV & CATV function from 10 to 100 channels on one screen.
   Buzzer & Noise Margin real time graph for digital signals microinterruptions.
   Reflectometric measurements APP.
   Optical Input (opt.).
   WI-FI analyzer (opt.).
   HEVC H265 decoder
   SATELITE: DiSEqC, SCR, dCSS & Motorized antenna commands, SAT FINDER & SAT EXPERT.
   Custom Channel Plans: 25 (199 ch. per plan), Programmable TV, SAT (or combined TV/SAT) by PC or Local Keyboard.
   Loggers: TV, SAT & combined with stop & go function.
   SAT Memory Plan: More than 2.000 transponders prememorized for world wide Satellite.
   Free S.M.A.R.T. PC interface program and FW upgrades.
   OPTIONS*: Check the Cross reference.

SPECIFICATIONS: MEASUREMENTS, SPECTRUM ANALYSIS & PICTURES

   Frequency Range: TV, CATV & Radio: 30-1.000 MHz; SAT: 700–2.700 MHz.
   Frequency Resolution: TV & CATV 25 KHz; SAT: 5 MHz.
   Power range Meas.: TV 35 to 115 dBµV, SAT 5 to 105 dBµV.
   Digital Meas: Digital Power, MER (36 to 40 dB max depending on modulation), BER, PER, LDPC, BCH, Noise Margin, MER versus CARRIER.
   Measurement Resolution: 0.1 dB.
   Level Measurement Accuracy: 1 dB typ. (2 dB max.)
   Resolution Filter Bandwidth: TV & CATV: 100 KHz @ -3 dB; SAT: 5 MHz @ -3 dB.
   Constellation: for TV/CATV and SAT signals.
   Spectrum: Fast spectrum, Max Hold and spectrum memorization with real time compare function.
   Net-id on board: Net-id, NID, TSID, LCN, SAT Orbit Position.
   Echoes, Pre-echoes, Micro-echoes: Representation in real Time.
   Quality: Digital Auto quality Test: PASS-MARGINAL-FAIL.
   Digital Pictures: MPEG2-4 SD & HD, HEVC (opt.) pictures with Program List, Audio Video PIDs, LCN, Video bit Rate all on one screen.

OPTICAL MEASUREMENTS

   SC input connector.
   Automatic loss calculation.
   Wavelengths (nm): 1310, 1490 & 1550.
   Range: -25 to +6 dBm.
   Resolution: 0.1 dB.
   Accuracy: +/- 0.5 dB.
   Optical to RF conversion.

COMM. PORTS AND OUTPUTS

   RF Input : 75 ohm (interchangeable “F”).
   USB 2.0: Type B (PC Interface).
   Audio: AAC supplied, DOLBY (opt.).
   Video: Composite Video input.

GENERAL SPECIFICATIONS

   5” TFT TOUCH display: 16:9 high resolution and high brightness.
   Power Supply: Built in LiPo battery with 2 to 4 hours duration (depending on the function) & Battery Test function.
   DC voltage at RF input: 5 – 12 – 18 – 24 VDC, DiSEqC, SCR & dCSS commands.
   PC Interface: USB-B.
   Front-Panel: Alpha numeric keypad.
   Power Save: TFT backlight timer, brightness adj.
   PC Management: S.M.A.R.T. software.
   Weight: only 1,4 Kg with batteries.
   Size: H 13,0 x W 25,5 x D 4 cm.
   Housing: Aluminium and Steel and padded bag.

OPTIONS

   Optic Ingress
   Decoding HEVC H265 images
   WI-FI analyzer
   Dolby Audio AC3 DD+
   Elite bag with extra padding